Warning: String not found

   

Broadcast Products / HW Interfaces / Adlink PCI-PCIe

HW Interfaces

Adlink PCI-PCIe

the Adlink Card is available in PCI, PCIe oder PCI Low profile. So any kind of integration can be covered by this GPI Card


PCI-7250/7251
8-CH Relay Outputs & 8-CH Isolated DI PCI Cards
Features

    * Supports a 32-bit 5 V PCI bus
    * 8-CH relay outputs on PCI-7250
    * 8-CH isolated DI
    * On-board LED indicators for relay status
    * On-board relay driving circuits
    * Relay output stats read back
    * On-board low-pass filtering for DI
    * PCI-7250 extendable up to 32-CH relay outputs & 32-CH DI with three PCI-7251

  • Adlink PCI-PCIe
    • LPCIe-7250
      8-CH Relay Outputs & 8-CH Isolated DI Card
      Features

          * x1 lane PCI Express Interface
          * 8-CH SPDT
          * 8-CH isolated digital inputs
          * Non-latching relays
          * On-board LED indicators for relay status
          * On-board relay driving circuits
          * Relay output status read back

      Introduction

      LPCIe-7250 provides 8-CH SPDT (Form C) relay outputs and 8-CH isolated digital inputs. The status of each relay output is represented by an onboard LED. When the relay is in SET condition, its corresponding LED will turn ON, and on the contrary, it is OFF. All digital input channels are non-polarity, optically isolated, and may be set to use RC filter or not. The devices are suitable for collecting digital inputs in noisy environments.

  • Adlink PCI-PCIe
    • LPCI-7250
      Low-Profile 8-CH Relay Outputs & 8-CH Isolated DI PCI card
      Features

          * Supports a 32-bit 3.3 V or 5 V PCI bus
          * 8-CH SPDT
          * 8-CH isolated digital inputs
          * Non-latching relays
          * On-board LED indicators for relay status
          * On-board relay driving circuits
          * Relay output status read back

      Introduction

      ADLINK LPCI-7250 is a Low-Profile PCI DIO card. LPCI-7250 provides 8-CH SPDT (Form C) relay outputs and 8-CH isolated digital inputs. The status of each relay output is represented by an onboard LED. When the relay is in SET condition, its corresponding LED will turn ON, and on the contrary, it is OFF. All digital input channels are non-polarity, optically isolated, and may be set to use RC filter or not. The devices are suitable for collecting digital inputs in noisy environments.