USB Relay Module with 8 relays
•USB 8 Channel Relay Module
•8 LED's visualizing the state of the output lines
•Simple assembly in a rack, as a standalone equipment in the laboratory area or as a mobile equipment for a notebook
•Up to 4 x modules in one PC System supported
•No external power supply required
The USBREL8 is a Plug & Play module with 8 DIL Reed relays. The maximum load for the relays is 1 Amp / 15 W.
You can use the module as freestanding device in the laboratory environment, as mobile equipment connected to a Notebook or it can be mounted to a top-hat rail i.e. for the use in a rack system.
The USBREL8 has a plugable connector to connect and disconnect the module easily from your external circuits without using a screw driver.
The state of all relays is signaled through the onboard LED's. The configuration LED shows that the module has power and whether it is initialized by the driver. Up to 4 modules can be used in parallel. The module can be identified by a module address which is set by jumpers onboard.
8 Switch-On Relays (DIL Reed) (max. 1 Amp / 15 Watts)
Max. 30 Volts
• Temperature range