|
|
Produits Radio / HW Interfaces / GPIO over IP
HW Interfaces
GPIO over IP
GPIO interface
Ethernet-input/output module with 16 inputs and 16 outputs (relays 1A)
Ethernet interface-controlled in-/output module
16 relay outputs and 16 optocoupler inputs
One LED status indication for each input and output state
Timeout output protection
Galvanic input isolation using optocouplers
Galvanic output isolation using relays
DIN rail module
Pluggable terminal block
-
GPIO over IP
Ethernet-Interface
Power Supply 7 to 24V DC (by a double-pole pluggable screw clamp)
Interface 10/100 Mbit Ethernet
Configuration over web interface (IP-addr, netmask, ...)
One LED for each 3,3V and 5V voltage feed
Control-LED Ethernet activity
ERROR
Input state change (only for digital outputs)
Timeout (only for outputs)
I/O Module access
Optocoupler-Input-Module
Inputs 16 Opto-In-Inputs
Galvanic isolated using optocoupler
24V AC switching voltage (optional as well available for 15V, 12V, or 5V)
16 Bit-counter per input channel
Logging of impulses between 2 read out cycles
Activity-LED A LED for each input channel
Connectors 16 pin pluggable terminal block each 8 inputs
Relays-Output-Module
Outputs 16 Relay output
Galvanically isolated using relays
Max. switching voltage: 36V AC
Max. switching current: 1A AC
Max. switching power: 20W
Activity-LED A LED for each output channel
Connectors 16 pin pluggable terminal block for each 8 outputs
General
Operating temperature +10°C...+50°C
Dimensions 126 mm x 126 mm x 31 mm (lxwxh)
-
GPIO over IP
Power Supply 85 .. 264V AC (47 .. 63Hz)
120 .. 370V DC
Input (bei 230V) 0,6A
output 24V
output 0...2A
Activity-LED LED for Power-On
Operating temperature -20°C...+60°C
Dimensions 78mm X 93mm X 56mm (LxBxH)
