Warning: String not found

The main characteristic of the TRACE series is the newly developed high speed hardware architecture, which guarantees data transfers with ultra low latencies and practically without CPU load.

Besides the hardware integrated DSP mixer with Total Recall the Trace Pro provides the card-spanning TDM-Sync-Bus connecting several MARIAN cards to one synchronous main system and allowing the free routing of audio channels within all TRACE cards in this system.

Like every member of the TRACE-series, the Trace Pro is characterized by an easy installation and it`s steadily controlled high quality of manufacturing. Marian grants a five year warranty on every member of the TRACE family.

In-/Outputs
1 x stereo AES/EBU I/O (24/192)
1 x stereo Analog I/O (24/192)
1 x CDROM digital S/PDIF (internal)
1 x Word/Superclock Input (w. term.)
Samplerate Converter on digital input
TDM-SyncBus
Technical Data
PCI 2.3 card, 32 Bit, 3.3V/5V
Sample formats: 8, 16, 20, 24, 32 Bit Mono/Stereo
Digital Input
XLR AES/EBU (balanced), galvanic isolated
CDROM digital S/PDIF (internal)
Input voltage: ex 0,2 Vss
Samplerates (variable): 32 kHz to 192 kHz
Digital Output
XLR AES/EBU (balanced), galvanic isolated
Output voltage: 3,5 Vss (with 110 Ohm)
Samplerates: 28 kHz to 212 kHz (Single Wire Mode)
Analog Input
XLR balanced, via breakout cable
Impedance: 10 kOhm
Input level (adj.):
+18 dBu; +15 dBu; +8 dBu and -6 dBV for 0 dBFS
AD input leveling from -48 dB to +18 dB
SNR AD @ 192 kHz: 105 dB / 108 dB(A)
THD+N @ -3 dBFS: < 0,002 % / < -94 dB
Cross-talk attenuation: >100 dB
Analog Output
XLR balanced, via breakout cable
Impedance: 75 Ohm
Output level:
+18 dBu; +8 dBu and -6 dBV for 0 dBFS
DA output adjustment from -78 dB to 0 dB
SNR DA @ 96kHz: 113 dB(A)
THD+N @ -1 dBFS: < 0,001% / < -100 dB
Cross-talk attenuation: > 110 dB
Frequency response @ 48 kHz: -0,5 db 20 Hz to 22 kHz
Frequency response @ 96 kHz: -0,5 db 20 Hz to 44 kHz
Frequency response @192kHz: -1 db 20 Hz to 61 kHz

Samplerate Conversion
Conversion ratio: 1:16 to 16:1
Dynamic range: 140 dB
THD+N: -140 dB
Wordclock-/Superclock Input
BNC connector
Input 10 kOhm - software adjustable termination to 75 Ohm
Input response: 1 Vss - 5,6 Vss
DC-Offset free; Schmitt trigger input; overvoltage protection
Synchronisation sources
Wordclock Input
AES/EBU Input
Internal
TDM SyncBus
Master and Slave mode
Driver Suite (MultiClient) 
Windows VISTA, XP, 2000, 2003:
    MME, ASIO 2.0,
    DirectSound, GSIF2,
    WDM (Kernel streaming)